Spectrally selective emitters based on 3D Mo nanopillars for thermophotovoltaic energy harvesting

Anisha Chirumamilla, Yuanqing Yang, Maria H. Salazar, Fei Ding, Deyong Wang, Peter Kjær Kristensen, Peter Fojan, Sergey I. Bozhevolnyi, Duncan S. Sutherland, Kjeld Pedersen, Manohar Chirumamilla*

*Corresponding author for this work

Research output: Contribution to journal/Conference contribution in journal/Contribution to newspaperJournal articleResearchpeer-review

30 Downloads (Pure)

Abstract

High-temperature stable emitters with spectral selective functionality are an absolute condition for efficient conversion of thermal radiation into electricity using thermophotovoltaic (TPV) systems. Usually, spectral selective emitters are made up of multilayered materials or geometrical structures resulting from complex fabrication processes. Here, we report a spectrally selective emitter based on a single metal layer coating of molybdenum (Mo) over a 3D dielectric pillar geometry. 3D Mo nanopillars are fabricated using large-area and cost-effective hole-mask colloidal lithography. These nanostructures show an absorptivity/emissivity of 95% below the cut-off wavelength of an InGaAsSb PV cell at 2.25 μm, and a sharp decline in absorptivity/emissivity in the near-infrared regions, approaching a low emissivity of 10%. The 3D Mo nanopillars show outstanding thermal/structural stability up to 1473 K for 24 h duration under Ar atmosphere and polarization and angle invariance up to 60° incidence angles. With a low-cost and scalable fabrication method, 3D Mo nanostructures provide tremendous opportunities in TPV and high temperature photonic/plasmonic applications.

Original languageEnglish
Article number100503
JournalMaterials Today Physics
Volume21
Number of pages10
ISSN2542-5293
DOIs
Publication statusPublished - Nov 2021

Keywords

  • 3D nanopillars
  • Gap plasmon resonator
  • High temperature stability
  • Molybdenum
  • Spectrally selective emitters

Fingerprint

Dive into the research topics of 'Spectrally selective emitters based on 3D Mo nanopillars for thermophotovoltaic energy harvesting'. Together they form a unique fingerprint.

Cite this