Post-treatments of polydopamine coatings influence cellular response

Maiken B. Davidsen; Jorge Felipe Lima Teixeira; Jeppe Dehli; Christian Karlsson; David Kraft; Pedro P.C. Souza; Morten Foss

doi:10.1016/j.colsurfb.2021.111972

Post-treatments of polydopamine coatings influence cellular response

Maiken B. Davidsen, Jorge Felipe Lima Teixeira, Jeppe Dehli, Christian Karlsson, David Kraft, Pedro P.C. Souza, Morten Foss^*

^*Corresponding author for this work

Research output: Contribution to journal/Conference contribution in journal/Contribution to newspaper › Journal article › Research › peer-review

25 Citations (Scopus)

103 Downloads (Pure)

Abstract

Polydopamine (PDA) is the final oxidation product of dopamine or other catecholamines. Since the first reports of PDA coatings starting around 2007, these coatings have been widely studied as a versatile and inexpensive one-step coating option for biomaterial functionalization. The coating attach to a wide range of materials and can subsequently be modified with biomolecules or nanoparticles. However, as a strong candidate for biomaterial research and even clinical use, it is important to unravel the changes in physico-chemical properties and the cell-PDA interaction as a function of heat sterilization procedures and shelf storage periods. Four groups were examined in this study: titanium (Ti), PDA-coated Ti samples and PDA-coated Ti samples either stored for up to two weeks at room temperature or heated at 121 °C for 24 h, respectively. We used X-ray Photoelectron Spectroscopy (XPS), Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS) and Water contact angle (WCA) to characterize chemical composition and surface properties of the groups. Cell adhesion and proliferation was examined by three different cell types: human primary dermal fibroblasts (hDF), human epidermal keratinocytes (HaCaTs) and a murine preosteoblastic cell line (MC3T3-E1), respectively. Cells were cultured on PDA coated samples for 4 h, 3 days and 5 days. Both thermal treatment of PDA at 121℃ for 24 h and storage of the samples for 2 weeks increased the amount of quinone groups at the surface and decreased the amount of primary amine groups as detected by XPS and ToF-SIMS. Even though these surface reactions increased the WCA of the PDA coating, we found that the post-treatments increased cell proliferation for both hDFs, HaCaTs and MC3T3-E1 s as compared to pristine PDA. This emphasizes the importance of post-treatment and shelf-time for PDA coatings.

Original language	English
Article number	111972
Journal	Colloids and Surfaces B: Biointerfaces
Volume	207
ISSN	0927-7765
DOIs	https://doi.org/10.1016/j.colsurfb.2021.111972
Publication status	Published - Nov 2021

Keywords

Cell proliferation
Polydopamine
Post-treatment
Surface functionalization

Access to Document

10.1016/j.colsurfb.2021.111972Licence: CC BY

1-s2.0-S0927776521004161-mainFinal published version, 4.38 MBLicence: CC BY

Cite this

@article{145bd3c32511426da013fff9d975734d,

title = "Post-treatments of polydopamine coatings influence cellular response",

abstract = "Polydopamine (PDA) is the final oxidation product of dopamine or other catecholamines. Since the first reports of PDA coatings starting around 2007, these coatings have been widely studied as a versatile and inexpensive one-step coating option for biomaterial functionalization. The coating attach to a wide range of materials and can subsequently be modified with biomolecules or nanoparticles. However, as a strong candidate for biomaterial research and even clinical use, it is important to unravel the changes in physico-chemical properties and the cell-PDA interaction as a function of heat sterilization procedures and shelf storage periods. Four groups were examined in this study: titanium (Ti), PDA-coated Ti samples and PDA-coated Ti samples either stored for up to two weeks at room temperature or heated at 121 °C for 24 h, respectively. We used X-ray Photoelectron Spectroscopy (XPS), Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS) and Water contact angle (WCA) to characterize chemical composition and surface properties of the groups. Cell adhesion and proliferation was examined by three different cell types: human primary dermal fibroblasts (hDF), human epidermal keratinocytes (HaCaTs) and a murine preosteoblastic cell line (MC3T3-E1), respectively. Cells were cultured on PDA coated samples for 4 h, 3 days and 5 days. Both thermal treatment of PDA at 121℃ for 24 h and storage of the samples for 2 weeks increased the amount of quinone groups at the surface and decreased the amount of primary amine groups as detected by XPS and ToF-SIMS. Even though these surface reactions increased the WCA of the PDA coating, we found that the post-treatments increased cell proliferation for both hDFs, HaCaTs and MC3T3-E1 s as compared to pristine PDA. This emphasizes the importance of post-treatment and shelf-time for PDA coatings.",

keywords = "Cell proliferation, Polydopamine, Post-treatment, Surface functionalization",

author = "Davidsen, {Maiken B.} and Teixeira, {Jorge Felipe Lima} and Jeppe Dehli and Christian Karlsson and David Kraft and Souza, {Pedro P.C.} and Morten Foss",

note = "Publisher Copyright: {\textcopyright} 2021 The Authors",

year = "2021",

month = nov,

doi = "10.1016/j.colsurfb.2021.111972",

language = "English",

volume = "207",

journal = "Colloids and Surfaces B: Biointerfaces",

issn = "0927-7765",

publisher = "Elsevier BV",

}

TY - JOUR

T1 - Post-treatments of polydopamine coatings influence cellular response

AU - Davidsen, Maiken B.

AU - Teixeira, Jorge Felipe Lima

AU - Dehli, Jeppe

AU - Karlsson, Christian

AU - Kraft, David

AU - Souza, Pedro P.C.

AU - Foss, Morten

PY - 2021/11

Y1 - 2021/11

N2 - Polydopamine (PDA) is the final oxidation product of dopamine or other catecholamines. Since the first reports of PDA coatings starting around 2007, these coatings have been widely studied as a versatile and inexpensive one-step coating option for biomaterial functionalization. The coating attach to a wide range of materials and can subsequently be modified with biomolecules or nanoparticles. However, as a strong candidate for biomaterial research and even clinical use, it is important to unravel the changes in physico-chemical properties and the cell-PDA interaction as a function of heat sterilization procedures and shelf storage periods. Four groups were examined in this study: titanium (Ti), PDA-coated Ti samples and PDA-coated Ti samples either stored for up to two weeks at room temperature or heated at 121 °C for 24 h, respectively. We used X-ray Photoelectron Spectroscopy (XPS), Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS) and Water contact angle (WCA) to characterize chemical composition and surface properties of the groups. Cell adhesion and proliferation was examined by three different cell types: human primary dermal fibroblasts (hDF), human epidermal keratinocytes (HaCaTs) and a murine preosteoblastic cell line (MC3T3-E1), respectively. Cells were cultured on PDA coated samples for 4 h, 3 days and 5 days. Both thermal treatment of PDA at 121℃ for 24 h and storage of the samples for 2 weeks increased the amount of quinone groups at the surface and decreased the amount of primary amine groups as detected by XPS and ToF-SIMS. Even though these surface reactions increased the WCA of the PDA coating, we found that the post-treatments increased cell proliferation for both hDFs, HaCaTs and MC3T3-E1 s as compared to pristine PDA. This emphasizes the importance of post-treatment and shelf-time for PDA coatings.

AB - Polydopamine (PDA) is the final oxidation product of dopamine or other catecholamines. Since the first reports of PDA coatings starting around 2007, these coatings have been widely studied as a versatile and inexpensive one-step coating option for biomaterial functionalization. The coating attach to a wide range of materials and can subsequently be modified with biomolecules or nanoparticles. However, as a strong candidate for biomaterial research and even clinical use, it is important to unravel the changes in physico-chemical properties and the cell-PDA interaction as a function of heat sterilization procedures and shelf storage periods. Four groups were examined in this study: titanium (Ti), PDA-coated Ti samples and PDA-coated Ti samples either stored for up to two weeks at room temperature or heated at 121 °C for 24 h, respectively. We used X-ray Photoelectron Spectroscopy (XPS), Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS) and Water contact angle (WCA) to characterize chemical composition and surface properties of the groups. Cell adhesion and proliferation was examined by three different cell types: human primary dermal fibroblasts (hDF), human epidermal keratinocytes (HaCaTs) and a murine preosteoblastic cell line (MC3T3-E1), respectively. Cells were cultured on PDA coated samples for 4 h, 3 days and 5 days. Both thermal treatment of PDA at 121℃ for 24 h and storage of the samples for 2 weeks increased the amount of quinone groups at the surface and decreased the amount of primary amine groups as detected by XPS and ToF-SIMS. Even though these surface reactions increased the WCA of the PDA coating, we found that the post-treatments increased cell proliferation for both hDFs, HaCaTs and MC3T3-E1 s as compared to pristine PDA. This emphasizes the importance of post-treatment and shelf-time for PDA coatings.

KW - Cell proliferation

KW - Polydopamine

KW - Post-treatment

KW - Surface functionalization

UR - http://www.scopus.com/inward/record.url?scp=85111773367&partnerID=8YFLogxK

U2 - 10.1016/j.colsurfb.2021.111972

DO - 10.1016/j.colsurfb.2021.111972

M3 - Journal article

C2 - 34364251

AN - SCOPUS:85111773367

SN - 0927-7765

VL - 207

JO - Colloids and Surfaces B: Biointerfaces

JF - Colloids and Surfaces B: Biointerfaces

M1 - 111972

ER -

Post-treatments of polydopamine coatings influence cellular response

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this