Aarhus University Seal / Aarhus Universitets segl

Ole Balling

  1. 2019
  2. Published

    Optimization of material removal rate in milling of thin-walled structures using penalty cost function. / Ringgaard, Kasper; Mohammadi, Yaser; Merrild, Christian; Balling, Ole; Ahmadi, Keivan.

    In: International Journal of Machine Tools and Manufacture, Vol. 145, 103430, 10.2019.

    Research output: Contribution to journal/Conference contribution in journal/Contribution to newspaperJournal articleResearchpeer-review

  3. Published

    Characterization of machine tool vise using operational modal analysis. / Ringgaard, Kasper; Knudsen, Nikolaj; Jensen, Jens; Juul, Martin Ørum Ørhem; Balling, Ole.

    In: Procedia CIRP, Vol. 82, 07.2019, p. 249-254.

    Research output: Contribution to journal/Conference contribution in journal/Contribution to newspaperJournal articleResearchpeer-review

  4. Submitted

    AVT-248 Next-Generation NATO Reference Mobility Model (NG-NRMM) Development. / Balling, Ole; Bradbury, Michael; Bruce, Jonathan; Cammarere, Mark; Choi, K. K.; Dasch, Jean; Foster, Craig; Funk, Matthew; Gaul, Nicholas; Hodges, Henry; Jain, Abhinandan; Jayakumar, Paramsothy; McCullough, Michael; Niemann, Jeffrey; Ramyar, Elham; Scalia, Joseph; Wasfy, Tamer; Wojtysiak, Brian.

    NATO Science and Technology Organisation (STO) , 2019. 518 p.

    Research output: Book/anthology/dissertation/reportReportResearch

  5. Published

    Calibration of reconfigurable stewart-gough platform for mobile machining application. / Hansen, A. B. ; Laursen, J. M.; Henriksen, S. T. ; Rydahl-Haastrup, Morten; Ringgaard, Kasper; Balling, Ole.

    ASME 2019 International Design Engineering Technical Conferences and computers and Information in Engineering Conference. 2019.

    Research output: Contribution to book/anthology/report/proceedingArticle in proceedingsResearchpeer-review

  6. Submitted

    Closely spaced modes in multi setup operational modal analysis. / Juul, Martin Ørum Ørhem; Ringgaard, Kasper; Balling, Ole; Brincker, Rune.

    In: Modeling, Identification and Control, 2019.

    Research output: Contribution to journal/Conference contribution in journal/Contribution to newspaperJournal articleResearchpeer-review

  7. Published

    Comparison of two (geometric) algorithms for auto OMA. / Juul, Martin Ørum Ørhem; Olsen, Peter; Balling, Ole; Amador, Sandro ; Brincker, Rune.

    Topics in Modal Analysis & Testing, Volume 9: Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics 2018. ed. / Michael Mains; Brandon J. Dilworth. Vol. 9 Springer, 2019. p. 65-68 (Conference Proceedings of the Society for Experimental Mechanics Series; No. 9).

    Research output: Contribution to book/anthology/report/proceedingArticle in proceedingsResearchpeer-review

  8. Submitted

    Cooperative Demonstration of Technology (CDT- 308) : Next-Generation NATO Reference Mobility Model (NG-NRMM). / Letherwood, Michael; Jayakumar, Paramsothy; Gorsich, David; Rogers, Paul; Hoenlinger, Michael; Mayda, William; McCullough, Michael; Bradley, Scott; Alger, Russ ; Serban, Radu; Balling, Ole; Homaa, Frederik; Wasfy, Tamer; Gaul, Nick; Bradbury, Michael; Pesheck, Erik; Reinecke, David; Hirschkom, Martin; Wong, Joe; Bendtsen, Louise; Funk, Matt; Williams, Ryan; Mueller, Christoph.

    NATO Science and Technology Organisation (STO) , 2019. 110 p.

    Research output: Book/anthology/dissertation/reportReportResearch

  9. Published

    Operational Modal Analysis On Wind Turbine Hub. / Juul, Martin Ørum Ørhem; Balling, Ole; Brincker, Rune.

    Topics in Modal Analysis & Testing, Volume 9: Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics 2018. ed. / Michael Mains; Brandon J. Dilworth. Vol. 9 Springer, 2019. p. 69-77 (Conference Proceedings of the Society for Experimental Mechanics Series; No. 9).

    Research output: Contribution to book/anthology/report/proceedingArticle in proceedingsResearchpeer-review

  10. Accepted/In press

    Operational modal analysis on a six degree of freedom parallel manipulator: Reproducibility, excitation & pose dependency. / Ringgaard, Kasper; Balling, Ole.

    The First International Nonlinear Dynamics Conference. 2019.

    Research output: Contribution to book/anthology/report/proceedingArticle in proceedingsResearch

  11. Published

    Smooth online time-varying input shaping with fractional delay FIR filtering. / Thomsen, Dan Kielsholm; Søe-Knudsen, Rune; Brandt, David; Balling, Ole; Zhang, Xuping.

    In: Control Engineering Practice, Vol. 88, 2019, p. 21-37.

    Research output: Contribution to journal/Conference contribution in journal/Contribution to newspaperJournal articleResearchpeer-review

  12. 2018
  13. Published

    Preliminary Simulation Study Combining Operational Modal Analysis and a Two Step Parameter Identification Method on 6-SPS Parallel Manipulator for Machining Purposes. / Ringgaard, Kasper; Balling, Ole.

    ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: 30th Conference on Mechanical Vibration and Noise. Vol. 8 American Society of Mechanical Engineers, 2018. p. V008T10A038 DETC2018-85336.

    Research output: Contribution to book/anthology/report/proceedingArticle in proceedingsResearchpeer-review

  14. Published

    Tracked and Wheeled Vehicle Benchmark - A Demonstration of Simulation Maturity for Next Generation Nato Reference Mobility Model. / Balling, Ole; McCullough, Michael; Hodges, Henry; Pulley, Reid; Jayakumar, Paramsothy.

    2018. Paper presented at 2018 NDIA Ground Vehicle Systems Engineering and Technology Symposium, Novi, United States.

    Research output: Contribution to conferencePaperResearchpeer-review

  15. Accepted/In press

    Design Space Exploration in the Development of Agricultural Robots. / Foldager, Frederik; Balling, Ole; Boel, Martin; Gamble, Carl; Larsen, Peter Gorm; Green, Ole.

    Proceedings of the EurAgEng 2018. Wageningen, 2018.

    Research output: Contribution to book/anthology/report/proceedingArticle in proceedingsResearchpeer-review

  16. Published

    Design Space Exploration in the Development of Agricultural Robots. / Foldager, Frederik; Balling, Ole; Boel, Martin; Gamble, Carl; Larsen, Peter Gorm; Green, Ole.

    Book of Abstracts of the European Conference on Agricultural Engineering: AgEng2018. Wageningen : Wageningen University, 2018. p. 60-61.

    Research output: Contribution to book/anthology/report/proceedingConference abstract in proceedingsResearchpeer-review

  17. Published

    Shallow Water Dampers for Mitigation of Wind Turbine Tower Vibrations. / Juul, Thomas; Jakobsen, Peter Christian; Balling, Ole; Zhang, Zili; van der Borch, Philip.

    2018. Abstract from The 5th
    joint International Conference on Multibody System Dynamics, Lissabon, Portugal.

    Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

  18. Published

    Generating Vibration Free Rest-to-Rest Trajectories for Configuration Dependent Dynamic Systems via 3-Segmented Input Shaping. / Thomsen, Dan Kielsholm; Søe-Knudsen, Rune ; Brandt, David ; Balling, Ole; Zhang, Xuping.

    2018 IEEE International Conference on Robotics and Automation (ICRA). IEEE, 2018. p. 4361-4366.

    Research output: Contribution to book/anthology/report/proceedingArticle in proceedingsResearchpeer-review

  19. 2016
  20. Published

    OMA Identification of a wind turbine rotor hub for monitoring purpose. / Juul, Martin Ørum Ørhem; Kovacs, Emese; Brincker, Rune; Balling, Ole.

    Proceedings of the 2016 Leuven Conference on Noise and Vibration Engineering International Conference on Noise and Vibration Engineering: ISMA 2016-USD2016. Leuven, 2016. ID 211.

    Research output: Contribution to book/anthology/report/proceedingArticle in proceedingsResearchpeer-review

  21. Published

    Proposal for verification of a 3D discrete element soil physics model. / Haastrup, Morten; Balling, Ole; Nørremark, Michael.

    2016. Abstract from International Conference on Agricultural Engineering 2016, Aarhus, Denmark.

    Research output: Contribution to conferenceConference abstract for conferenceResearch

  22. Published

    Modelling changes in the dynamic response of a cantilever beam during the machining process using the discrete element method. / Andersen, Anders H. ; Foldager, Frederik ; Ringgaard, Kasper; Balling, Ole.

    ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: 28th Conference on Mechanical Vibration and Noise. Vol. 8 American Society of Mechanical Engineers, 2016. p. V008T10A048 DETC2016-60447.

    Research output: Contribution to book/anthology/report/proceedingArticle in proceedingsResearchpeer-review

  23. Published

    Modelling of Material Removal on Large Wind Turbine Hub. / Ringgaard, Kasper; Balling, Ole.

    Proceedings of the 4th Joint International Conference on Multibody System Dynamics: IMSD 2016. 2016.

    Research output: Contribution to book/anthology/report/proceedingArticle in proceedingsResearchpeer-review

  24. Published

    Simple Path-following Rider Model for Single-track Vehicles. / Fonnesbæk Jensen, Mike; Balling, Ole.

    Proceedings of the 4th Joint International Conference on Multibody System Dynamics: IMSD 2016. 2016.

    Research output: Contribution to book/anthology/report/proceedingArticle in proceedingsResearchpeer-review

  25. 2015
  26. Published

    Convergence characteristics of thin ANCF shell elements in arbitrary and initially curved mesh. / Hyldahl, Per Christian; Mikkola, Aki M; Balling, Ole; Sopanen, Jussi T.

    Proceedings of 3rd Joint International Conference on Multibody System Dynamics & The 7th Asian Conference on Multibody Dynamics . 2015.

    Research output: Contribution to book/anthology/report/proceedingArticle in proceedingsResearchpeer-review

  27. Published

    Modeling and Feasibility Study of Nonlinear Suspension Components in Multibody Systems using Absolute Nodal Coordinate Formulation Based Beam Elements -Application to Stabilizer Bar. / Hyldahl, Per Christian; Andersen, Sebastian ; Mikkelsen, Sebastian ; Balling, Ole.

    In: S A E International Journal of Passenger Cars - Mechanical Systems, Vol. 8, No. 2, 2015-01-0642, 2015, p. 449-459.

    Research output: Contribution to journal/Conference contribution in journal/Contribution to newspaperJournal articleResearchpeer-review

  28. 2014
  29. Published

    Behavior of thin rectangular ANCF shell elements in various mesh configurations. / Hyldahl, Per; Mikkola, Aki M.; Balling, Ole; Sopanen, Jussi T.

    In: Nonlinear Dynamics, 22.06.2014, p. 1277-1291.

    Research output: Contribution to journal/Conference contribution in journal/Contribution to newspaperJournal articleResearchpeer-review

  30. Published

    Fatigue Analysis of Large Non-linear Finite Element Models Using Model Reduction and Flexible Multibody Theory. / Elkjær, A; Wind-Larsen, T.; Kjølhede, K.; Balling, Ole.

    The 3rd Joint International Conference on Multibody System Dynamics. 2014. OTH 3 of 8.

    Research output: Contribution to book/anthology/report/proceedingArticle in proceedingsResearchpeer-review

  31. Published

    Studies on the kinematics of thin shell elements based on the absolute nodal coordinate formulation. / Hyldahl, Per Christian; Mikkola, A M; Balling, Ole.

    Proceedings of the ASME 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: 10th International Conferencee on Multibody Systems, Nonlinear Dynamics and Control. Vol. 6 American Society of Mechanical Engineers, 2014. p. V006T10A034 DETC2014-34635.

    Research output: Contribution to book/anthology/report/proceedingArticle in proceedingsResearchpeer-review

  32. 2013
  33. Published

    Dynamic Analysis of Offshore Oil Pipe Installation Using the Absolute Nodal Coordinate Formulation. / Nielsen, Jimmy D; Madsen, Søren B; Hyldahl, Per Christian; Balling, Ole.

    ASME 2013 International Mechanical Engineering Congress and Exposition (IMECE): Volume 4A: Dynamics, Vibration and Control. American Society of Mechanical Engineers, 2013. V04AT04A080.

    Research output: Contribution to book/anthology/report/proceedingArticle in proceedingsResearchpeer-review

  34. Published

    A thin plate element based on the combined Arbitrary Lagrange-Euler and Absolute Nodal Coordinate Formulations. / Hyldahl, Per Christian; Mikkola, A; Balling, Ole.

    In: Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, Vol. 227, No. 3, 09.2013, p. 211-219 .

    Research output: Contribution to journal/Conference contribution in journal/Contribution to newspaperJournal articleResearchpeer-review

  35. Published

    Permanent magnets in accelerators can save energy, space and cost. / Bødker, F.; Baandrup, L.O.; Hauge, N.; Laurberg, K.F.; Nielsen, G.; Baurichter, A.; Nielsen, B.R.; Bendixen, F.B.; Valler, P.; Kjeldsteen, P.; Thomsen, Heine Dølrath; Balling, Ole; Møller, Søren Pape; Synal, H.A.

    IPAC2013, Proceedings of the 4th International Particle Accelerator Conference. ed. / Zhimin Dai; Christine Petit-Jean-Gena; Volker RW Schaa; Chuang Zhang. JACoW.org, 2013. p. 3511-3513.

    Research output: Contribution to book/anthology/report/proceedingArticle in proceedingsResearchpeer-review

  36. 2008
  37. Published

    A Hardware-In-The-Loop Simulation of Braking Capability. / Allen, R.W; Park, G.D.; Woon, S.J.; Balling, Ole; Goddard, P.

    Proceedings of the Driving Simulator Conference and Exhibition 2008. 2008.

    Research output: Contribution to book/anthology/report/proceedingArticle in proceedingsResearchpeer-review

  38. 2005
  39. Published

    Further Analysis of Potential Road/Terrain Characterization Rating Metrics. / Gavin Howe, J; Lee, D C; Chrstos, J P; Balling, Ole; Myers, T T; Allen, R W; Gorsich, D J; Reid, A.

    In: SAE Technical paper series, 2005.

    Research output: Contribution to journal/Conference contribution in journal/Contribution to newspaperConference articleResearchpeer-review

  40. 2004
  41. Published

    Exploring Vehicle Limit Performance. / Balling, Ole.

    2004.

    Research output: Book/anthology/dissertation/reportPh.D. thesisResearch

  42. Published

    Development of Rollover Maneuvers using Optimization Techniques. / Balling, Ole; Bernard, James E.

    In: S A E Transactions, Vol. 113, No. 6, 2004, p. 1124-1132 .

    Research output: Contribution to journal/Conference contribution in journal/Contribution to newspaperConference articleResearchpeer-review

  43. Published

    Distributed Virtual Proving Ground Simulation of Cooperative Agricultural Tasks. / He, Y; Papelis, Y; Balling, Ole.

    2004. Paper presented at IMAGE 2004 Conference , Scottsdale, Arizona, United States.

    Research output: Contribution to conferencePaperResearch

  44. 2002
  45. Published

    Collaborative Driving Simulation. / Balling, Ole.

    2002. Paper presented at SAE World Congress, Detroit, United States.

    Research output: Contribution to conferencePaperResearchpeer-review

  46. 1999
  47. Published

    Multirate Integration for Real-Time Simulation of Wheel Loader Hydraulics. / Buzdugan, L; Balling, Ole; Lee, P; Balling, C; Freeman, J S; Huck, F.

    1999. Paper presented at ASME Design Engineering Technical Conference, 1999, Las Vegas, United States.

    Research output: Contribution to conferencePaperResearchpeer-review