Publikation: Bidrag til tidsskrift/Konferencebidrag i tidsskrift /Bidrag til avis › Tidsskriftartikel › Forskning › peer review
Effect of reduced exposed surface area and enhanced infiltration on ammonia emission from untreated and separated cattle slurry. / Pedersen, Johanna; Nyord, Tavs; Feilberg, Anders et al.
I: Biosystems Engineering, Bind 211, 11.2021, s. 141-151.Publikation: Bidrag til tidsskrift/Konferencebidrag i tidsskrift /Bidrag til avis › Tidsskriftartikel › Forskning › peer review
}
TY - JOUR
T1 - Effect of reduced exposed surface area and enhanced infiltration on ammonia emission from untreated and separated cattle slurry
AU - Pedersen, Johanna
AU - Nyord, Tavs
AU - Feilberg, Anders
AU - Labouriau, Rodrigo
AU - Hunt, Derek
AU - Bittman, Shabtai
PY - 2021/11
Y1 - 2021/11
N2 - Ammonia (NH3) loss during field application of liquid manure (slurry) causes loss of nu- trients for the crops and contributes to contamination of the environment. The emission can be mitigated by different low-emission application technologies and slurry treatment prior to application. It is assumed that a reduced area for air-slurry interaction will reduce the emission. The NH3 emission mitigation potential of technologies intended to reduce manure-air contact by reducing the exposed surface area (ESA) of the slurry or enhancing slurry infiltration was investigated for cattle slurry applied on grassland. Treatments tested were: 1) removing solids by solideliquid separation of the slurry, 2) reduced ESA by narrow band application, and 3) application with a sub-surface-deposition (SSD) slurry application (creating aeration slots). For untreated cattle slurry NH3 emission was not reduced by reducing ESA, but application over aeration slots significantly decreased emission. How- ever, reduced ESA by band application reduced emission from separated slurry compared to broadcast applied slurry, but no additional reduction was obtained by using the SSD technique. Lower emission was generally observed from separated slurry compared to untreated slurry for all application methods. This study shows that a reduction in NH3 emission is not necessarily obtained solely by reducing the ESA. It is hypothesized that rapid surface drying or crust formation of the untreated slurry in the relatively warm sunny conditions of these trials mitigated NH3 emission, thereby masking the effects of a reduced ESA.
AB - Ammonia (NH3) loss during field application of liquid manure (slurry) causes loss of nu- trients for the crops and contributes to contamination of the environment. The emission can be mitigated by different low-emission application technologies and slurry treatment prior to application. It is assumed that a reduced area for air-slurry interaction will reduce the emission. The NH3 emission mitigation potential of technologies intended to reduce manure-air contact by reducing the exposed surface area (ESA) of the slurry or enhancing slurry infiltration was investigated for cattle slurry applied on grassland. Treatments tested were: 1) removing solids by solideliquid separation of the slurry, 2) reduced ESA by narrow band application, and 3) application with a sub-surface-deposition (SSD) slurry application (creating aeration slots). For untreated cattle slurry NH3 emission was not reduced by reducing ESA, but application over aeration slots significantly decreased emission. How- ever, reduced ESA by band application reduced emission from separated slurry compared to broadcast applied slurry, but no additional reduction was obtained by using the SSD technique. Lower emission was generally observed from separated slurry compared to untreated slurry for all application methods. This study shows that a reduction in NH3 emission is not necessarily obtained solely by reducing the ESA. It is hypothesized that rapid surface drying or crust formation of the untreated slurry in the relatively warm sunny conditions of these trials mitigated NH3 emission, thereby masking the effects of a reduced ESA.
U2 - 10.1016/j.biosystemseng.2021.09.003
DO - 10.1016/j.biosystemseng.2021.09.003
M3 - Journal article
VL - 211
SP - 141
EP - 151
JO - Biosystems Engineering
JF - Biosystems Engineering
SN - 1537-5110
ER -