Institut for Forretningsudvikling og Teknologi

Design and Implementation of Seventeen Level Inverter with Reduced Components

Publikation: Bidrag til tidsskrift/Konferencebidrag i tidsskrift /Bidrag til avisTidsskriftartikelForskningpeer review

DOI

  • C. Dhanamjayulu, Aalborg Universitet, Vellore Inst Technol VIT Univ, Vellore Institute of Technology, Sch Elect Engn
  • ,
  • Devalraju Prasad, Vellore Institute of Technology
  • ,
  • P. Sanjeevikumar
  • Pandav Kiran Maroti, Aalborg Universitet
  • ,
  • Jens Bo Holm-Nielsen, Aalborg Universitet
  • ,
  • Frede Blaabjerg, Aalborg Universitet

The multilevel inverters (MLI) are resourceful in producing a voltage waveform with superior-quality staircase counterfeit sinusoidal and depressed harmonic distortion (THD). Several conventional topologies are proposed to realize the MLI however, the limitations of these topologies may involve more DC sources and power-switching devices, and less THD, which in turn, increases the cost and size of the inverter. These drawbacks can be eliminated with the proposed hybrid Cascaded H-Bridge Multilevel Inverter with reduced components topology. As compared with the established MLI topologies the recommended topology having a reduced number of DC sources, power-switching devices, component count level factor, lesser TSV, more efficient, lesser THD, and cost-effective. The proposed MLI is a blend of a single-phase T-Type inverter and an H-Bridge module made of sub switches. This paper incorporates the design and simulation of the multilevel inverter with staircase PWM technique. Further, the 9-level and 17-level MLI is examined with different combinational loads. The proposed inverter is stable during nonlinear loads, and it is well suited for FACTS and renewable energy grid-connected applications. An operational guideline has been explained with correct figures and tables. The Output voltage wave is realized in numerical simulation. Finally, the experimental demonstrations were performed by implementing a hardware prototype setup for both linear and nonlinear loads using the dSPACE controller laboratory.

OriginalsprogEngelsk
TidsskriftIEEE Access
Vol/bind9
Sider (fra-til)16746-16760
Antal sider15
ISSN2169-3536
DOI
StatusUdgivet - 2021
Eksternt udgivetJa

Bibliografisk note

Publisher Copyright:
CCBY

Copyright:
Copyright 2021 Elsevier B.V., All rights reserved.

Se relationer på Aarhus Universitet Citationsformater

ID: 219025678