Aarhus University Seal / Aarhus Universitets segl

Cross-Borehole ERT: Sensitivity, Model Resolution, and Field Data Quality

Publikation: KonferencebidragKonferenceabstrakt til konferenceForskningpeer review

Sensitivity, resolution, and data quality are important parameters to consider when designing an ERT cross-borehole survey. We present an open-source algorithm for computing 2D and 3D sensitivity patterns of any borehole setup and use this to compare single-borehole and different cross-borehole electrode configurations, which both show complex patterns. To study the resolution capability of an entire survey, the model resolution matrix is computed for a field dataset. The dataset is split into different electrode configurations and the model resolution matrices of the different configuration are compared. The results show that the sensitivity and resolution decreases very quickly away from the electrodes, especially for the single-borehole configurations. In the studied field case, this means cross-borehole configurations are needed to correctly image the area between the boreholes, even though the cross-borehole data often are associated with a lower signal-to-noise ratio due to near-zero potential measurements and generally more outliers. The study concludes that in a production mode, where acquisition time and thus the number of possible data points are limited, the combination of electrode configurations must be carefully considered and a trade-off between resolution and data quality must be evaluated.
OriginalsprogEngelsk
Udgivelsesår2021
StatusUdgivet - 2021
BegivenhedEAGE Near Surface Geoscience 2021 - Bordeaux, Frankrig
Varighed: 30 aug. 20211 sep. 2021
https://eage.eventsair.com/nsg2021/

Konference

KonferenceEAGE Near Surface Geoscience 2021
LandFrankrig
ByBordeaux
Periode30/08/202101/09/2021
Internetadresse

Se relationer på Aarhus Universitet Citationsformater

ID: 222081978