-
Uddannelse
Find uddannelse
Studievejledning
Kvalitet
- Forskning
-
Samarbejde
Virksomheder
Kommuner og regioner
Gymnasier
Myndigheder
-
Om AU
Organisation
Kontakt
Om AU
- Organisation
- Ledelse
- Strategi
- AU i tal
- AU's historie
- Internationalt samarbejde
- Bæredygtighed
- Campus 2.0
- Diversitet og ligestilling
- Ledige stillinger
- Presse
- Kontakt
B-MIMO high step-up DC/DC converter with high capability to control inputs
Publikation: Bidrag til tidsskrift/Konferencebidrag i tidsskrift /Bidrag til avis › Tidsskriftartikel › Forskning › peer review
DOI
- https://doi.org/10.1049/pel2.12486
Forlagets udgivne version
- Mohammad Maalandish, University of Tabriz, Aarhus Universitet ,
- Seyed Hossein Hosseini, University of Tabriz, Near East University ,
- Mehran Sabahi, University of Tabriz ,
- Naghi Rostami, University of Tabriz ,
- Mohammad Hassan Khooban
Here, a new bidirectional multi-input-multi-output (B-MIMO) high step-up DC/DC converter with lower losses on switch/diode is proposed as suitable for electric vehicles. The proposed topology consists of five inputs and two outputs and the battery (energy storage) is considered one of the inputs. Due to the bidirectional nature of the proposed topology, different scenarios of it are described. In discharging mode, the stored energy of the battery is transferred to the output loads. In charging mode, the surplus energy by regenerative braking will be responsible for charging the battery in the related scenario. Also, each input can charge the battery separately in different scenarios. In general, the proposed topology is capable to work in different scenarios for bypassing/charging/discharging the battery. Other advantages of the proposed topology include continuous current of all the inputs, independent control of inputs from each other and lower normalized voltage stress on semiconductors. These features make the proposed bidirectional MIMO DC/DC converter (B-MIMO-C) suitable for electric vehicle applications. The proposed topology operation is provided in the laboratory testing for 870W prototype, and the obtained results confirm the theoretical calculations as well.
| Originalsprog | Engelsk |
|---|---|
| Tidsskrift | IET Power Electronics |
| Vol/bind | 16 |
| Nummer | 9 |
| Sider (fra-til) | 1499-1513 |
| Antal sider | 15 |
| ISSN | 1755-4535 |
| DOI | |
| Status | Udgivet - 24 jul. 2023 |
Se relationer på Aarhus Universitet Citationsformater
ID: 314557171