Alveolar bone measurements in magnetic resonance imaging compared with cone beam computed tomography: a pilot, ex-vivo study

João Marcus de Carvalho e Silva Fuglsig*, Brian Hansen, Lars Schropp, Donald R. Nixdorf, Ann Wenzel, Rubens Spin-Neto

*Corresponding author af dette arbejde

Publikation: Bidrag til tidsskrift/Konferencebidrag i tidsskrift /Bidrag til avisTidsskriftartikelForskningpeer review

Abstract

Objectives: To compare alveolar bone height and width measurements from zero-echo-time MRI (ZTE-MRI) and cone beam CT (CBCT), in human specimens. Material and methods: Twenty posterior edentulous sites in human cadaver specimens were imaged with CBCT and ZTE-MRI. Bone height and width at 1, 3, 5, 7 and 9 mm from the top of the alveolar ridge was measured by two trained observers in cross-sections of a site where an implant was to be planned. Twenty percent of the sample was measured in duplicate to assess method error and intra-observer reproducibility (ICC). The differences between CBCT and ZTE-MRI measurements were compared (t-test). Results: Inter- and intra-observer reproducibility was >0.90. The method error (average between observers) for bone height was 0.45 mm and 0.39 mm, and for bone width (average) was 0.52 mm and 0.80 mm (CBCT and ZTE-MRI, respectively). The majority of the bone measurement differences were statistically insignificant, except bone width measurements at 5 mm (p ≤.05 for both observers). Mean measurement differences were not larger than the method error. Conclusion: ZTE-MRI is not significantly different from CBCT when comparing measurements of alveolar bone height and width.

OriginalsprogEngelsk
TidsskriftActa Odontologica Scandinavica
Vol/bind81
Nummer3
Sider (fra-til)241-248
Antal sider8
ISSN0001-6357
DOI
StatusUdgivet - 2023

Fingeraftryk

Dyk ned i forskningsemnerne om 'Alveolar bone measurements in magnetic resonance imaging compared with cone beam computed tomography: a pilot, ex-vivo study'. Sammen danner de et unikt fingeraftryk.

Citationsformater