Institut for Mekanik og Produktion

Aarhus Universitets segl
Du er her: Institut for Mekanik og Produktion » Om instituttet » Kontakt » Ole Balling » Publikationer

Om instituttet

Ole Balling

1 - 44 ud af 44Pr. side: 100
RSS feed af denne liste
Sortering: Udgivelsesdato
  1. 2022
  2. Udgivet

    Drawbar pull testing for machine-soil interaction characterization. / Balling, Ole; SIRANGELO, Dario .

    2022. 35-36 Abstract fra Advances and Innovations in Agricultural Engineering., Herning, Danmark.

    Publikation: Konferencebidrag › Konferenceabstrakt til konference › Forskning › peer review

  3. Udgivet

    On the Combination of Geometrically Nonlinear Models and Substructuring for Multibody Simulation of Wind Turbine Blades. / L. Jensen, Christian Sigurd ; B. E. Pedersen, Rasmus ; Mula, Blas Blanco et al.

    18th International Conference on Multibody Systems, Nonlinear Dynamics, and Control (MSNDC). American Society of Mechanical Engineers (ASME), 2022. DETC2022-90948, V009T09A011 (Proceedings of the ASME Design Engineering Technical Conference, Bind 9).

    Publikation: Bidrag til bog/antologi/rapport/proceeding › Konferencebidrag i proceedings › Forskning › peer review

  4. Udgivet

    Modeling soil aggregate fracture using the discrete element method. / Foldager, Frederik; Munkholm, Lars Juhl; Balling, Ole et al.

    I: Soil and Tillage Research, Bind 218, 105295, 04.2022.

    Publikation: Bidrag til tidsskrift/Konferencebidrag i tidsskrift /Bidrag til avis › Tidsskriftartikel › Forskning › peer review

  5. 2021
  6. Udgivet

    Multibody Models for Tower Vibrations With an Unbalanced Rotor. / Pedersen, Simon Sejer ; B. Madsen, Niclas ; Escalona, José et al.

    ASME 2021 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Bind 9 American Society of Mechanical Engineers (ASME), 2021. DETC2021-72182, V009T09A017.

    Publikation: Bidrag til bog/antologi/rapport/proceeding › Konferencebidrag i proceedings › Forskning › peer review

  7. Udgivet

    Autonomous vehicle assessment framework. / Balling, Ole; Jeppesen, Mads Rosenhøj; Madsen, Sigurd Agerskov.

    Proceedings of the Ground Vehicle Systems Engineering and Technology Symposium (GVSETS). 2021.

    Publikation: Bidrag til bog/antologi/rapport/proceeding › Konferencebidrag i proceedings › Forskning › peer review

  8. Udgivet

    Vibration control of industrial robot arms by multi-mode time-varying input shaping. / Thomsen, Dan Kielsholm; Søe-Knudsen, Rune ; Balling, Ole et al.

    I: Mechanism and Machine Theory, Bind 155, 104072, 01.2021.

    Publikation: Bidrag til tidsskrift/Konferencebidrag i tidsskrift /Bidrag til avis › Tidsskriftartikel › Forskning › peer review

  9. Udgivet

    Towards a Digital Twin - Modelling an Agricultural Vehicle. / Foldager, Frederik F.; Thule, Casper; Balling, Ole et al.

    Leveraging Applications of Formal Methods, Verification and Validation: 9th International Symposium on Leveraging Applications of Formal Methods, ISoLA 2020, Rhodes, Greece, October 20–30, 2020, Proceedings, Part IV. red. / Tiziana Margaria; Bernhard Steffen. Cham : Springer, 2021. s. 109-123 (Lecture Notes in Computer Science, Bind 12479).

    Publikation: Bidrag til bog/antologi/rapport/proceeding › Konferencebidrag i proceedings › Forskning › peer review

  10. 2020
  11. Udgivet

    Operational modal analysis on a six degree of freedom parallel manipulator : Reproducibility, excitation and pose dependency. / Ringgaard, Kasper; Balling, Ole.

    Nonlinear Dynamics of Structures, Systems and Devices: Proceedings of the First International Nonlinear Dynamics Conference (NODYCON 2019). red. / Walter Lacarbonara; Balakumar Balachandran; Jun Ma; J. A. Tenreiro Machado; Gabor Stepan. Cham : Springer, 2020. s. 329-336.

    Publikation: Bidrag til bog/antologi/rapport/proceeding › Konferencebidrag i proceedings › Forskning › peer review

  12. Udgivet

    Railway multibody simulation with the knife-edge-equivalent wheel–rail constraint equations. / Escalona, José L.; Aceituno, Javier F.; Urda, Pedro et al.

    I: Multibody System Dynamics, Bind 48, Nr. 4, 2020, s. 373-402.

    Publikation: Bidrag til tidsskrift/Konferencebidrag i tidsskrift /Bidrag til avis › Tidsskriftartikel › Forskning › peer review

  13. 2019
  14. Udgivet

    Optimization of material removal rate in milling of thin-walled structures using penalty cost function. / Ringgaard, Kasper; Mohammadi, Yaser; Merrild, Christian et al.

    I: International Journal of Machine Tools and Manufacture, Bind 145, 103430, 10.2019.

    Publikation: Bidrag til tidsskrift/Konferencebidrag i tidsskrift /Bidrag til avis › Tidsskriftartikel › Forskning › peer review

  15. Udgivet

    Characterization of machine tool vise using operational modal analysis. / Ringgaard, Kasper; Knudsen, Nikolaj; Jensen, Jens et al.

    I: Procedia CIRP, Bind 82, 07.2019, s. 249-254.

    Publikation: Bidrag til tidsskrift/Konferencebidrag i tidsskrift /Bidrag til avis › Tidsskriftartikel › Forskning › peer review

  16. Afsendt

    AVT-248 Next-Generation NATO Reference Mobility Model (NG-NRMM) Development. / Balling, Ole; Bradbury, Michael; Bruce, Jonathan et al.

    NATO Science and Technology Organisation (STO) , 2019. 518 s.

    Publikation: Bog/antologi/afhandling/rapport › Rapport › Forskning

  17. Udgivet

    Calibration of reconfigurable stewart-gough platform for mobile machining application. / Bennekov Hansen, Andreas; Møberg Laursen, Jørgen; Henriksen, Sebastian Theis et al.

    ASME 2019 International Design Engineering Technical Conferences and computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2019. DETC2019-98137, V05BT07A015.

    Publikation: Bidrag til bog/antologi/rapport/proceeding › Konferencebidrag i proceedings › Forskning › peer review

  18. Afsendt

    Closely spaced modes in multi setup operational modal analysis. / Juul, Martin Ørum Ørhem; Ringgaard, Kasper; Balling, Ole et al.

    I: Modeling, Identification and Control, 2019.

    Publikation: Bidrag til tidsskrift/Konferencebidrag i tidsskrift /Bidrag til avis › Tidsskriftartikel › Forskning › peer review

  19. Udgivet

    Comparison of two (geometric) algorithms for auto OMA. / Juul, Martin Ørum Ørhem; Olsen, Peter; Balling, Ole et al.

    Topics in Modal Analysis & Testing, Volume 9: Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics 2018. red. / Michael Mains; Brandon J. Dilworth. Bind 9 Springer, 2019. s. 65-68 (Conference Proceedings of the Society for Experimental Mechanics Series; Nr. 9).

    Publikation: Bidrag til bog/antologi/rapport/proceeding › Konferencebidrag i proceedings › Forskning › peer review

  20. Afsendt

    Cooperative Demonstration of Technology (CDT- 308) : Next-Generation NATO Reference Mobility Model (NG-NRMM). / Letherwood, Michael; Jayakumar, Paramsothy; Gorsich, David et al.

    NATO Science and Technology Organisation (STO) , 2019. 110 s.

    Publikation: Bog/antologi/afhandling/rapport › Rapport › Forskning

  21. Udgivet

    Operational Modal Analysis On Wind Turbine Hub. / Juul, Martin Ørum Ørhem; Balling, Ole; Brincker, Rune.

    Topics in Modal Analysis & Testing, Volume 9: Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics 2018. red. / Michael Mains; Brandon J. Dilworth. Bind 9 Springer, 2019. s. 69-77 (Conference Proceedings of the Society for Experimental Mechanics Series; Nr. 9).

    Publikation: Bidrag til bog/antologi/rapport/proceeding › Konferencebidrag i proceedings › Forskning › peer review

  22. Udgivet

    Smooth online time-varying input shaping with fractional delay FIR filtering. / Thomsen, Dan Kielsholm; Søe-Knudsen, Rune; Brandt, David et al.

    I: Control Engineering Practice, Bind 88, 2019, s. 21-37.

    Publikation: Bidrag til tidsskrift/Konferencebidrag i tidsskrift /Bidrag til avis › Tidsskriftartikel › Forskning › peer review

  23. 2018
  24. Udgivet

    Preliminary Simulation Study Combining Operational Modal Analysis and a Two Step Parameter Identification Method on 6-SPS Parallel Manipulator for Machining Purposes. / Ringgaard, Kasper; Balling, Ole.

    ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: 30th Conference on Mechanical Vibration and Noise. Bind 8 American Society of Mechanical Engineers, 2018. s. V008T10A038 DETC2018-85336.

    Publikation: Bidrag til bog/antologi/rapport/proceeding › Konferencebidrag i proceedings › Forskning › peer review

  25. Udgivet

    Tracked and Wheeled Vehicle Benchmark - A Demonstration of Simulation Maturity for Next Generation Nato Reference Mobility Model. / Balling, Ole; McCullough, Michael; Hodges, Henry et al.

    2018. Paper præsenteret ved 2018 NDIA Ground Vehicle Systems Engineering and Technology Symposium, Novi, USA.

    Publikation: Konferencebidrag › Paper › Forskning › peer review

  26. Udgivet

    Design Space Exploration in the Development of Agricultural Robots. / Foldager, Frederik; Balling, Ole; Boel, Martin et al.

    Proceedings of the EurAgEng 2018. Wageningen, 2018.

    Publikation: Bidrag til bog/antologi/rapport/proceeding › Konferencebidrag i proceedings › Forskning › peer review

  27. Udgivet

    Design Space Exploration in the Development of Agricultural Robots. / Foldager, Frederik; Balling, Ole; Boel, Martin et al.

    Book of Abstracts of the European Conference on Agricultural Engineering: AgEng2018. Wageningen : Wageningen University, 2018. s. 60-61.

    Publikation: Bidrag til bog/antologi/rapport/proceeding › Konferenceabstrakt i proceedings › Forskning › peer review

  28. Udgivet

    Shallow Water Dampers for Mitigation of Wind Turbine Tower Vibrations. / Juul, Thomas; Jakobsen, Peter Christian; Balling, Ole et al.

    2018. Abstract fra The 5th
    joint International Conference on Multibody System Dynamics, Lissabon, Portugal.

    Publikation: Konferencebidrag › Konferenceabstrakt til konference › Forskning › peer review

  29. Udgivet

    Generating Vibration Free Rest-to-Rest Trajectories for Configuration Dependent Dynamic Systems via 3-Segmented Input Shaping. / Thomsen, Dan Kielsholm; Søe-Knudsen, Rune ; Brandt, David et al.

    2018 IEEE International Conference on Robotics and Automation (ICRA). IEEE, 2018. s. 4361-4366.

    Publikation: Bidrag til bog/antologi/rapport/proceeding › Konferencebidrag i proceedings › Forskning › peer review

  30. 2016
  31. Udgivet

    OMA Identification of a wind turbine rotor hub for monitoring purpose. / Juul, Martin Ørum Ørhem; Kovacs, Emese; Brincker, Rune et al.

    Proceedings of the 2016 Leuven Conference on Noise and Vibration Engineering International Conference on Noise and Vibration Engineering: ISMA 2016-USD2016. Leuven, 2016. ID 211.

    Publikation: Bidrag til bog/antologi/rapport/proceeding › Konferencebidrag i proceedings › Forskning › peer review

  32. Udgivet

    Proposal for verification of a 3D discrete element soil physics model. / Haastrup, Morten; Balling, Ole; Nørremark, Michael.

    2016. Abstract fra International Conference on Agricultural Engineering 2016, Aarhus, Danmark.

    Publikation: Konferencebidrag › Konferenceabstrakt til konference › Forskning

  33. Udgivet

    Modelling changes in the dynamic response of a cantilever beam during the machining process using the discrete element method. / Andersen, Anders H. ; Foldager, Frederik ; Ringgaard, Kasper et al.

    ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: 28th Conference on Mechanical Vibration and Noise. Bind 8 American Society of Mechanical Engineers, 2016. s. V008T10A048 DETC2016-60447.

    Publikation: Bidrag til bog/antologi/rapport/proceeding › Konferencebidrag i proceedings › Forskning › peer review

  34. Udgivet

    Modelling of Material Removal on Large Wind Turbine Hub. / Ringgaard, Kasper; Balling, Ole.

    Proceedings of the 4th Joint International Conference on Multibody System Dynamics: IMSD 2016. 2016.

    Publikation: Bidrag til bog/antologi/rapport/proceeding › Konferencebidrag i proceedings › Forskning › peer review

  35. Udgivet

    Simple Path-following Rider Model for Single-track Vehicles. / Fonnesbæk Jensen, Mike; Balling, Ole.

    Proceedings of the 4th Joint International Conference on Multibody System Dynamics: IMSD 2016. 2016.

    Publikation: Bidrag til bog/antologi/rapport/proceeding › Konferencebidrag i proceedings › Forskning › peer review

  36. 2015
  37. Udgivet

    Convergence characteristics of thin ANCF shell elements in arbitrary and initially curved mesh. / Hyldahl, Per Christian; Mikkola, Aki M; Balling, Ole et al.

    Proceedings of 3rd Joint International Conference on Multibody System Dynamics & The 7th Asian Conference on Multibody Dynamics . 2015.

    Publikation: Bidrag til bog/antologi/rapport/proceeding › Konferencebidrag i proceedings › Forskning › peer review

  38. Udgivet

    Modeling and Feasibility Study of Nonlinear Suspension Components in Multibody Systems using Absolute Nodal Coordinate Formulation Based Beam Elements -Application to Stabilizer Bar. / Hyldahl, Per Christian; Andersen, Sebastian ; Mikkelsen, Sebastian et al.

    I: S A E International Journal of Passenger Cars - Mechanical Systems, Bind 8, Nr. 2, 2015-01-0642, 2015, s. 449-459.

    Publikation: Bidrag til tidsskrift/Konferencebidrag i tidsskrift /Bidrag til avis › Tidsskriftartikel › Forskning › peer review

  39. 2014
  40. Udgivet

    Behavior of thin rectangular ANCF shell elements in various mesh configurations. / Hyldahl, Per; Mikkola, Aki M.; Balling, Ole et al.

    I: Nonlinear Dynamics, 22.06.2014, s. 1277-1291.

    Publikation: Bidrag til tidsskrift/Konferencebidrag i tidsskrift /Bidrag til avis › Tidsskriftartikel › Forskning › peer review

  41. Udgivet

    Fatigue Analysis of Large Non-linear Finite Element Models Using Model Reduction and Flexible Multibody Theory. / Elkjær, A; Wind-Larsen, T.; Kjølhede, K. et al.

    The 3rd Joint International Conference on Multibody System Dynamics. 2014. OTH 3 of 8.

    Publikation: Bidrag til bog/antologi/rapport/proceeding › Konferencebidrag i proceedings › Forskning › peer review

  42. Udgivet

    Studies on the kinematics of thin shell elements based on the absolute nodal coordinate formulation. / Hyldahl, Per Christian; Mikkola, A M; Balling, Ole.

    Proceedings of the ASME 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: 10th International Conferencee on Multibody Systems, Nonlinear Dynamics and Control. Bind 6 American Society of Mechanical Engineers, 2014. s. V006T10A034 DETC2014-34635.

    Publikation: Bidrag til bog/antologi/rapport/proceeding › Konferencebidrag i proceedings › Forskning › peer review

  43. 2013
  44. Udgivet

    Dynamic Analysis of Offshore Oil Pipe Installation Using the Absolute Nodal Coordinate Formulation. / Nielsen, Jimmy D; Madsen, Søren B; Hyldahl, Per Christian et al.

    ASME 2013 International Mechanical Engineering Congress and Exposition (IMECE): Volume 4A: Dynamics, Vibration and Control. American Society of Mechanical Engineers, 2013. V04AT04A080.

    Publikation: Bidrag til bog/antologi/rapport/proceeding › Konferencebidrag i proceedings › Forskning › peer review

  45. Udgivet

    A thin plate element based on the combined Arbitrary Lagrange-Euler and Absolute Nodal Coordinate Formulations. / Hyldahl, Per Christian; Mikkola, A; Balling, Ole.

    I: Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, Bind 227, Nr. 3, 09.2013, s. 211-219 .

    Publikation: Bidrag til tidsskrift/Konferencebidrag i tidsskrift /Bidrag til avis › Tidsskriftartikel › Forskning › peer review

  46. Udgivet

    Permanent magnets in accelerators can save energy, space and cost. / Bødker, F.; Baandrup, L.O.; Hauge, N. et al.

    IPAC2013, Proceedings of the 4th International Particle Accelerator Conference. red. / Zhimin Dai; Christine Petit-Jean-Gena; Volker RW Schaa; Chuang Zhang. JACoW.org, 2013. s. 3511-3513.

    Publikation: Bidrag til bog/antologi/rapport/proceeding › Konferencebidrag i proceedings › Forskning › peer review

  47. 2008
  48. Udgivet

    A Hardware-In-The-Loop Simulation of Braking Capability. / Allen, R.W; Park, G.D.; Woon, S.J. et al.

    Proceedings of the Driving Simulator Conference and Exhibition 2008. 2008.

    Publikation: Bidrag til bog/antologi/rapport/proceeding › Konferencebidrag i proceedings › Forskning › peer review

  49. 2005
  50. Udgivet

    Further Analysis of Potential Road/Terrain Characterization Rating Metrics. / Gavin Howe, J; Lee, D C; Chrstos, J P et al.

    I: SAE Technical paper series, 2005.

    Publikation: Bidrag til tidsskrift/Konferencebidrag i tidsskrift /Bidrag til avis › Konferenceartikel › Forskning › peer review

  51. 2004
  52. Udgivet

    Exploring Vehicle Limit Performance. / Balling, Ole.

    2004.

    Publikation: Bog/antologi/afhandling/rapport › Ph.d.-afhandling

  53. Udgivet

    Development of Rollover Maneuvers using Optimization Techniques. / Balling, Ole; Bernard, James E.

    I: S A E Transactions, Bind 113, Nr. 6, 2004, s. 1124-1132 .

    Publikation: Bidrag til tidsskrift/Konferencebidrag i tidsskrift /Bidrag til avis › Konferenceartikel › Forskning › peer review

  54. Udgivet

    Distributed Virtual Proving Ground Simulation of Cooperative Agricultural Tasks. / He, Y; Papelis, Y; Balling, Ole.

    2004. Paper præsenteret ved IMAGE 2004 Conference , Scottsdale, Arizona, USA.

    Publikation: Konferencebidrag › Paper › Forskning

  55. 2002
  56. Udgivet

    Collaborative Driving Simulation. / Balling, Ole.

    2002. Paper præsenteret ved SAE World Congress, Detroit, USA.

    Publikation: Konferencebidrag › Paper › Forskning › peer review

  57. 1999
  58. Udgivet

    Multirate Integration for Real-Time Simulation of Wheel Loader Hydraulics. / Buzdugan, L; Balling, Ole; Lee, P et al.

    1999. Paper præsenteret ved ASME Design Engineering Technical Conference, 1999, Las Vegas, USA.

    Publikation: Konferencebidrag › Paper › Forskning › peer review