Evolution of Electrically Active Defects in n-GaN During Heat Treatment Typical for Ohmic Contact Formation

Research output: Contribution to journal/Conference contribution in journal/Contribution to newspaperJournal article

DOI

Ohmic contact formation to n-type GaN often involves high temperature steps, for example sintering at about 800 °C in the case of Ti-based contacts. Such processing steps might cause changes in the distribution, concentration, and properties of the defects. The present work aims at contributing to the knowledge about defect evolution in GaN upon processing at different temperatures. The processing temperatures are selected according to fabrication procedures for commonly used ohmic contacts to n-GaN: 300 °C (In-based), 550 °C (Ta-based), and 800 °C (Ti-based). Properties and concentration of the defects are studied by the means of deep level transient spectroscopy (DLTS). Changes in carrier capture kinetics are monitored with varying filling pulse duration.
Original languageEnglish
Article number1700516
JournalPhysica Status Solidi. A: Applications and Materials Science
Volume215
Issue number9
Number of pages6
ISSN1862-6319
DOIs
StatePublished - 9 May 2018

    Research areas

  • deep level transient spectroscopy, electron traps, GaN, n-type semiconductor, ohmic contacts, heat treatment

See relations at Aarhus University Citationformats

ID: 121370153